Cleaning nozzle on shark steam mop isn't an easy task, but we prepared this informational guide for our readers based on practical experience. Hope our dedication helps you to clean your nozzle on shark steam mop with our 3 steps.
Photo Credit: Amazon.com
If you own a steam mop, you may think that it is not necessary to clean it regularly. Even though steam mops kill bacteria, you need to clean it if you want to extend its shelf life. It is not that difficult to clean once you know a few simple steps that will make your job a lot easier.
It is highly recommended that you clean your shark steam mop after every use so that it can function properly. The below steps can be implemented on any steam mop, be it a Shark branded one or any other brand.
Let’s get to the step by step guide on how to clean nozzle on shark steam mop.
How To Clean Nozzle On Shark Steam Mop
The 5 steps outlined below can be used as a cleaning guide for your shark steam mop. Once you follow this step-by-step process, your steam mop will be ready to clean your floors immaculately again.
Step 1: Unplugging From Any Power Outlet
The first step is often the most important. If your shark steam mop is plugged to a power outlet, you need to unplug it at first before you can start your cleaning operation. The last thing you want is to have an accident while cleaning your electrical appliances. This is step is even more crucial if you have an automatic model that releases steam when plugged in.
You should also stay away from any steam that gets generated during this process as it may run the risk of scalding your skin. If you used your steam mop recently, let it
cool down for 15 to 20 minutes before you start the cleaning procedure.
Step 2: Removing All The Remaining Water From The Tank
Leaving water in the tank while not being used may shorten the lifespan of your steam mop. Water promotes corrosion, so you need to empty the water tank after every use. You may think that you are saving water by leaving it there, but it also runs the risk of developing molds inside the water tank.
Molds can grow where the water is damp and hot, and a steam mop is an ideal place for them to grow as it is usually hot inside the tank. Molds can also lead to a bad smell coming out of the tank, so it is best if you remove all the remaining water from the tank before you start to clean the machine thoroughly. Even if the amount of water is tiny, you should remove it earnestly.
Step 3: Cleaning The Steam Mop’s Water Tank
Buy a shark steam mop that has a detachable water tank as it will be easier for you to clean it. Some dust and grime can settle in on the water tank after every use, so take a clean piece of cloth and rub on the water tank from the inside out.
If you use a lot of water, you might see some scaling marks on the inside of the tank. These marks will appear as a white haze, and the best way to smoothly remove these
marks is to use vinegar. Vinegar is a natural antimicrobial agent and you don’t
need to buy separate cleaning solutions if you have some vinegar in your home.
Vinegar is acidic, so if you use too much of it to clean the tank it may corrode the plastic. So you need to ensure that the vinegar you use is diluted with water. 1 part vinegar and two parts of water will do the trick. After adding the diluted vinegar to the tank, take your cloth and run the water tank completely dry.
Make sure that the tank is dry before attaching it back to the steam mop. If you want to use the steam mop again, you can add water later when the cleaning job is completed. Steam mops don’t work well with cleaning solutions as they can damage the insides of the water tank, so it is best if you use vinegar every time you clean the steam mop.
Step 4: Cleaning The Insides Of The Nozzle
If you use hard water from the faucet regularly to clean with your steam mop, the passages of your nozzle can get blocked over time. This is because hard water contains a lot of impurities such as limestone which can attach itself to the nozzle. The workaround to this problem is to use distilled water that lacks minerals and is ideal for a steam mop.
Using distilled or demineralized water can extend the lifespan of your steam mop as it lets the steam flow freely from the nozzle. If your shark steam mop stops emitting steam, that means that the nozzle is clogged. When that happens, you need to remove the nozzle from the mop head base and clean it. Keep in mind that you might need a screwdriver to un-attach the nozzle as it is usually attached to the base of the mop.
Once the nozzle comes off, you can see the blockage clearly. Use a cotton pad to gently clean the nozzle. If the build-up is inside the nozzle, you need to use a thin pin to poke inside the nozzle and remove the residue. Shark steam mops come with nozzle cleaner that will assist you in this step.
Step 5: Washing The Mop Pads Or Changing Them Periodically
You should always clean the mop pads after use so that you can remove any bacteria from settling into the pads. If you have disposable pads, then throw them away once they get dirty and attach a new one to the mop head.
If the mop pads are made from cotton, it means that they are reusable. Wash these pads in the washing machine or you can do a simple hand wash to clean them periodically. Do not use bleach or any kind of fabric softeners to clean the mop pads as it may damage them.
If you are using the hand wash technique, use a mild liquid detergent to clean them. You can even use baking soda for this step. Take a teaspoon of the solution, and mix it with hot water and then dip the mop pad into the bucket of hot water. Keep it there for half an hour and then rinse it thoroughly with clean water.
Bacteria die at 160 degrees Fahrenheit, so if you are using a washing machine, you need to ensure that it is operating around this temperature. It is best to air dry the mop pads once you are done cleaning them.
Shark steam mops come with detailed cleaning instructions, so you should try to follow them. Air drying will help any sort of bad odors from appearing on the mop pads, and once it is completely dry, simply re-attach them to the mod head.
Keep in mind that cleaning your shark steam mop after every use is the best practice to prolong its durability. It takes less than an hour to follow all these steps, and it will ensure that your steam mop keeps operating smoothly for a prolonged period. Nozzles can be cleaned in a periodic fashion, as it takes a lot of uses for it to get blocked.